Screening of isolated bacteria from Persian Gulf petroleum sediments with capability of poly hydroxybutyrate production and identification of the physicochemical structure of the produced biopolymer

Document Type : Original Research

Authors

Iranian Research Organization for Science and Technology (IROST)

Abstract
Background and Objective: Polyhydroxyalkanoates (PHAs) are polymers with biodegradable and biocompatible properties that are produced by some bacteria. In the present study, petroleum sediments were applied to screen PHA-producing bacteria.

Method: The industrial culture medium of petroleum effluent was used as a low-cost and economical medium for isolating and identifying the superior PHA-producing strain. Finally, the chemical and physical properties of the extracted biopolymer were investigated by Fourier-transform infrared spectroscopy, differential scanning calorimetry, and proton nuclear magnetic resonance.

Results: In general, 11 out of 76 isolated bacterial strains could produce biopolymers among which, the Sb8 strain was selected as the best PHA-producing strain in the industrial medium with the cell dry weight of 44.13% and 1.2 g/l in 27 h. This strain was identified as Citreicella thiooxidans by sequencing determination. Eventually, the results of physicochemical analyses revealed that polyhydroxybutyrate (PHB) was the extracted biopolymer.

Conclusion: The present study is the first report on PHB production by Iranian native Citreicella thiooxidans strain by focusing on identifying and separating producing bacteria, as well as determining the type of the produced biopolymer and the production capability in a low-cost culture medium of the petroleum effluent. Considering the production of the biopolymer with a relatively high yield percentage without adding any supplement to the petroleum effluent medium, the isolated wild strain has the potential to produce PHB.

Keywords

Subjects


[1] Luengo, J. M., Garcia, B., Sandoval, A., Naharro, G. and Olivera, E. R. (2003) Bioplastics from microorganisms. Curr Opin Microbiol 6(2), 251-260.
[2] Kalia, V. C., Raiada, N. and Sonakya, V. (2000) Bioplastics. J Sci Ind Res. 59, 433-445.
[3] Zinn, M. (2003) Tailor-made synthesis of polyhydroxyalkanoate. European Cells and Materials. 5, 38-39.
[4] Tsuge, T. (2002) Metabolic improvements and use of inexpensive carbon sources in microbial production of polyhydroxyalkanoates. J Biosci Bioeng. 6:579-584.
[5] Volova, T. G., Trusova, M. Y., Kalacheva, G. S. and Kozhevnicov, I. V. (2006) Physiological-biochemical properties and the ability to synthesize polyhydroxyalkanoates of the glucose-utilizing strain of the hydrogen bacterium Ralstonia eutropha B8562. Appllied Microbiology and Biotechnology. 73, 429- 433.
[6] Volova, T. G., Vasiliev, A. D., Zeer, E. P., Petrakovskaya, E. A. and Falaleev, O. V. (2000) Study of the molecular structure of polyhydroxybutyrate, a termoplastic and degradable biopolymer. Biofizika. 45, 445-451.
[7] Kadouri, D., Jurkevitch, E., Okon, Y. and Castro-Sowinski, S. (2005) Ecological and agricultural significance of bacterial polyhydroxyalkanoates. Critical Reviews in Microbiology. 31, 55-67.
[8] Ren, Q., Grubelnik, A., Hoerler, M., Ruth, K., Hartmann, R., Felber, H. and Zinn, M. (2005) Bacterial poly(hydroxyalkanoates) as a source of chiral hydroxyalkanoic acids. Biomacromolecules. 6, 2290-2298.
[9] Chen, G. Q., and Wu, Q. (2005) The application of polyhydroxyalkanoates as tissue engineering materials. Biomaterials. 26, 6565-6578.
[10] Ozdil, D., and Aydin, H. M. (2014) Polymers for medical and tissue engineering applications. J Chem. Technol Biotechnol. 89(12), 1793-1810.
[11] Akaraonye, E., Keshavarz, T., and Roy, I.(2010) Production of polyhydroxyalkanoates: the future green materials of choice. J Chem Technol Biotechnol. 85, 732-743.
[12] Albuquerque, MGE., Eiroa, M., Torres, C., Nunes, B. R., and Reis, M. A. M. (2007) Strategies for the development of a side stream process for polyhydroxyalkanoate (PHA) production from sugar cane molasses. J Biotechnol. 130, 411–421.
[13] Bhattacharyya, A., Pramanik, A., Maji, S. K., Haldar, S., Mukhopadhyay, U. K., and Mukherjee, J. (2012) Utilization of vinasse for production of poly-3-(hydroxybutyrate-co-hydroxyvalerate) by Haloferax mediterranei. AMB Express. 9:2(1), 34.
[14] Sathiyanarayanan, G., Kiran, G. S., Selvinc, J., and Saibaba, G. (2013) Optimization of polyhydroxybutyrate production by marine Bacillus megaterium MSBN04 under solid state culture. Int J Biol Macromol. 60, 253-261.
[15] Haas, R., Jin, B., and Zepf, F. T. (2008) Production of poly(3-hydroxybutyrate) from waste potato starch. Biosci Biotechnol Biochem. 72, 253–256.
[16] Priyadharshini, S., Sajayyan, A., and Ravindran, A. (2018) Optimization and production of Polyhydroxy butyrate from a Marine sponge associated Bacteria MSI21. International Journal of Emerging Technologies and Innovative Research. 5(9), 849-853.
[17] Hahn, S. K., Chang, Y. K., Kim, B. S., Lee, K. M., and Chang, H. N. (1993) The recovery of poly(3-hydroxybutyrate) by using dispersions of sodium hypochlorite solution and chloroform. Biotechnology Techniques. 7(3), 209-212.
[18] Law, J., and Slepecky, R.A. (1961) Assay of poly-beta-hydroxybutyric acid. Journal of Bacteriology. 82, 52–55.
[19] Pal, A., Parbhu, A., Kumar, A. A., Rajagopal, B., Dadhe, K., Pannamma, V., and Shivakumar, S. (2002) Optimization of Process Parameters for Maximum Poly (β) hydroxybutyrate (PHB) production by Bacillus thuringiensis IAM 12077. Polish Journal of Microbiology. 2, 149-154.
[20] Preethi, R., Sasikala, P., and Aravind, J. (2012) Microbial production of polyhydroxyalkanoate (PHAs) utilizing fruit waste as a substrate. Res in Biotech. 3(1), 61–69.
[21]. Shrivastava, A., Mishraa, S. K., Shethia, B., Pancha, I., Jain, D., and Mishraa, S. (2010) Isolation of promising bacterial strains from soil and marine environment for polyhydroxyalkanoates (PHAs) production utilizing Jatropha biodiesel byproduct. Int J Biol Macromol. 47, 283–287.
[22] Contreras, A. R., Koller, M., Dias, M. M. S., Monfort, M. C., Braunegg, G., and Calvo, M. S. M. (2013) High production of poly (3-hydroxybutyrate) from a wild Bacillus megaterium bolivian strain. J Appl Microbiol. 114(5), 1378–1387.
[23] Sorokin, D. Y., Tourova, T. P., and Muyzer, G. (2005) Citreicella thiooxidans gen. nov., sp. nov., a novel lithoheterotrophic sulfur-oxidizing bacterium from the Black Sea. Syst Appl Microbiol. 28, 679-687.
[24] Ahn, J., Jho, E. H., and Nam, K. (2015) Effect of C/N ratio on polyhydroxyalkanoates (PHA) accumulation by Cupriavidus necator and its implication on the use of rice straw hydrolysates. Environmental Engineering Research. 20(3), 246-253.
[25] Goff, M., Ward, P.G., and O’Connor, K.E. (2007) Improvement of the conversion of polystyrene to polyhydroxyalkanoate through the manipulation of the microbial aspect of the process: a nitrogen feeding strategy for bacterial cells in a stirred tank reactor. J Biotechnol 132:283–286.
[26] Bosco, F., and Chiampo, F. (2010). Production of polyhydroxyalkanoates (PHAs) using milk whey and dairy wastewater activated sludge Production of bioplastics using dairy residues. J. Biosci. Bioeng. 109, 418–421.
[27] Yuan, Q., Sparling, R., and Oleszkiewicz, J. (2020) Polyhydroxybutyrate Production from Municipal Wastewater Activated Sludge with Different Carbon Sources. J. Air, Soil and Water Research. 8(1).
[28] Hong, K., Sun, S., Tian, W., Chen, G. Q., and Huang, W. (1999) A rapid method for detecting bacterial polyhydroxyalkonates in intact cells by Fourier transform infrared spectroscopy. Appl Microbiol Biotechnol. 51, 523–526.